User Tools

Site Tools


sunvox:manual_en

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
sunvox:manual_en [2019/06/19 08:34]
nightradio [Pattern]
sunvox:manual_en [2019/09/09 10:01]
nightradio
Line 1: Line 1:
-[[http://www.warmplace.ru/​wiki/​doku.php?​id=sunvox:​manual_ru|Русская версия]]+[[https://​warmplace.ru/​wiki/​doku.php?​id=sunvox:​manual_ru|Русская версия]]
  
-[[http://www.warmplace.ru/​wiki/​doku.php?​id=sunvox:​manual_en&​do=export_pdf|PDF version of this page]]+[[https://​warmplace.ru/​wiki/​doku.php?​id=sunvox:​manual_en&​do=export_pdf|PDF version of this page]]
  
 ====== What is SunVox ====== ====== What is SunVox ======
Line 7: Line 7:
 SunVox is a small, fast and powerful modular synthesizer with pattern based sequencer (tracker). It is a tool for those people who like to compose music wherever they are, whenever they wish. On any device. On any system. SunVox is a small, fast and powerful modular synthesizer with pattern based sequencer (tracker). It is a tool for those people who like to compose music wherever they are, whenever they wish. On any device. On any system.
  
-Official SunVox page: [[http://www.warmplace.ru/​soft/​sunvox]]+Official SunVox page: [[https://​warmplace.ru/​soft/​sunvox]]
  
 ====== List of terms ====== ====== List of terms ======
Line 20: Line 20:
   * **LFO** - Low Frequency Oscillator which is used to modulate some synth/​effect parameters (frequency, volume, panning, etc.);   * **LFO** - Low Frequency Oscillator which is used to modulate some synth/​effect parameters (frequency, volume, panning, etc.);
   * **Panning** - the sound location in the left-right stereo space; if the sound source is mono, then this parameter is equivalent to Balance (described above).   * **Panning** - the sound location in the left-right stereo space; if the sound source is mono, then this parameter is equivalent to Balance (described above).
-  * **Phase** - position of a point in time on a waveform cycle (in Generator) or on a sample. Usually this means the initial phase, not the current position. <​html><​center><​img src="http://www.warmplace.ru/​docs/​sunvox/​phase.gif"></​center></​html>​+  * **Phase** - position of a point in time on a waveform cycle (in Generator) or on a sample. Usually this means the initial phase, not the current position. <​html><​center><​img src="https://​warmplace.ru/​docs/​sunvox/​phase.gif"></​center></​html>​
   * **Sample**:   * **Sample**:
     * amplitude of the audio signal at a point in time;     * amplitude of the audio signal at a point in time;
Line 56: Line 56:
  
 **Windows:​** **Windows:​**
-  - Download [[http://​warmplace.ru/​soft/​sunvox/sunvox.zip|SunVox for Windows]] (ZIP archive).+  - Download [[https://​warmplace.ru/​soft/​sunvox|SunVox for Windows]] (ZIP archive).
   - Unpack this archive to the user folder (with read and write permissions;​ for example, your own folder on the external flash drive).   - Unpack this archive to the user folder (with read and write permissions;​ for example, your own folder on the external flash drive).
   - You will see the new directory **sunvox** after unpacking - open it, and go to the **sunvox/​windows_x86** or **sunvox/​windows_x86_64** directory.   - You will see the new directory **sunvox** after unpacking - open it, and go to the **sunvox/​windows_x86** or **sunvox/​windows_x86_64** directory.
Line 62: Line 62:
  
 **Linux:** **Linux:**
-  - Download [[http://​warmplace.ru/​soft/​sunvox/sunvox.zip|SunVox for Linux]] (ZIP archive).+  - Download [[https://​warmplace.ru/​soft/​sunvox|SunVox for Linux]] (ZIP archive).
   - Unpack this archive to the home user directory (/​home/​username).   - Unpack this archive to the home user directory (/​home/​username).
   - You will see the new directory **sunvox** after unpacking - open it, and go to the **sunvox/​linux_**xxx ​ directory, where the xxx is the name of the architecture of your device.   - You will see the new directory **sunvox** after unpacking - open it, and go to the **sunvox/​linux_**xxx ​ directory, where the xxx is the name of the architecture of your device.
   - You will find several files in the **linux_**xxx folder: sunvox, sunvox_lofi,​ sunvox_no_simd,​ etc.; just use the most appropriate for your system.   - You will find several files in the **linux_**xxx folder: sunvox, sunvox_lofi,​ sunvox_no_simd,​ etc.; just use the most appropriate for your system.
   - In case of some errors: open Terminal, go to the sunvox directory (use **cd** command), enter **chmod a+x sunvox** and then **./​sunvox** ; if still not working - copy all error messages from the Terminal and send it to nightradio@gmail.com.   - In case of some errors: open Terminal, go to the sunvox directory (use **cd** command), enter **chmod a+x sunvox** and then **./​sunvox** ; if still not working - copy all error messages from the Terminal and send it to nightradio@gmail.com.
-[[http://www.warmplace.ru/​forum/​viewtopic.php?​f=16&​t=4454|Here is the instruction for Raspberry Pi users]]+[[https://​warmplace.ru/​forum/​viewtopic.php?​f=16&​t=4454|Here is the instruction for Raspberry Pi users]]
  
 **macOS:** **macOS:**
-  - Download [[http://​warmplace.ru/​soft/​sunvox/sunvox.zip|SunVox for macOS]] (ZIP archive).+  - Download [[https://​warmplace.ru/​soft/​sunvox|SunVox for macOS]] (ZIP archive).
   - You will see the new directory **sunvox** after unpacking; move it to some another user-created directory; don't use the Applications folder.   - You will see the new directory **sunvox** after unpacking; move it to some another user-created directory; don't use the Applications folder.
   - Go to the **sunvox/​sunvox/​macos** directory.   - Go to the **sunvox/​sunvox/​macos** directory.
   - Launch SunVox.   - Launch SunVox.
-[[http://www.warmplace.ru/​forum/​viewtopic.php?​f=3&​t=4399|Important information for the macOS 10.12+ users]].+[[https://​warmplace.ru/​forum/​viewtopic.php?​f=3&​t=4399|Important information for the macOS 10.12+ users]].
  
 **Android:​** **Android:​**
Line 83: Line 83:
  
 **Windows CE:** **Windows CE:**
-  - Download [[http://​warmplace.ru/​soft/​sunvox/sunvox.zip|SunVox for Windows CE]] (ZIP archive).+  - Download [[https://​warmplace.ru/​soft/​sunvox|SunVox for Windows CE]] (ZIP archive).
   - Unpack it to any folder on your computer.   - Unpack it to any folder on your computer.
   - You will see the new directory **sunvox** after unpacking - open it, and go to the **sunvox/​wince** directory.   - You will see the new directory **sunvox** after unpacking - open it, and go to the **sunvox/​wince** directory.
Line 107: Line 107:
 ====== Interface description ====== ====== Interface description ======
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​gui.png"></​html>​ +<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​gui.png"></​html>​ 
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​gui_play.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​gui_play.png"></​html>​
  
 The SunVox interface is divided into the several rectangular areas (windows): ​ The SunVox interface is divided into the several rectangular areas (windows): ​
Line 230: Line 230:
 The sound of the project should be the same (or close to the original) regardless of the device and system. The sound of the project should be the same (or close to the original) regardless of the device and system.
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​song.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​song.png"></​html>​
  
-A few words about hex numbers. Memory locations and software in today'​s computers use the hexadecimal **(hex)** number system which comprises sixteen distinct symbols, digits 0 - 9 and letters A, B, C, D, E, F (or a - f)  where the letters represent the numbers 10 - 15. For more detail on the hexadecimal system please visit: ​http://​en.wikipedia.org/​wiki/​Hexadecimal+A few words about hex numbers. Memory locations and software in today'​s computers use the hexadecimal **(hex)** number system which comprises sixteen distinct symbols, digits 0 - 9 and letters A, B, C, D, E, F (or a - f)  where the letters represent the numbers 10 - 15. For more detail on the hexadecimal system please visit: ​https://​en.wikipedia.org/​wiki/​Hexadecimal
  
 Examples of hexadecimal numbers and its decimal **(dec)** equivalents:​ Examples of hexadecimal numbers and its decimal **(dec)** equivalents:​
Line 252: Line 252:
 ===== Pattern ===== ===== Pattern =====
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​pattern.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​pattern.png"></​html>​
  
 **Pattern** is a group of simultaneously played tracks that represents some section of the SunVox project (score). It is divided into horizontal lines. Playing direction is top-down. **Pattern** is a group of simultaneously played tracks that represents some section of the SunVox project (score). It is divided into horizontal lines. Playing direction is top-down.
Line 387: Line 387:
 Note = C3; XXYY = 0407 (second note increment = 4; third note increment = 7) Note = C3; XXYY = 0407 (second note increment = 4; third note increment = 7)
 this is an attempt to produce a C-major chord. At the beginning of a line the C3 note is played, then 1/3 into the line the sound is retriggered at E-3, at 2/3 is retriggered at G3, and at the beginning of the next line (if there are no new notes to be played on the track), it is retriggered at C3 again. this is an attempt to produce a C-major chord. At the beginning of a line the C3 note is played, then 1/3 into the line the sound is retriggered at E-3, at 2/3 is retriggered at G3, and at the beginning of the next line (if there are no new notes to be played on the track), it is retriggered at C3 again.
-Video: [[http://​www.youtube.com/​watch?​v=gr8yhfLhVCE|Arpeggio Standard Effect]]+Video: [[https://​www.youtube.com/​watch?​v=gr8yhfLhVCE|Arpeggio Standard Effect]]
  
 **09 - Set sample offset.** This functionality enables you to start a sample from a specified position rather than the normal beginning position. Multiply value XXYY * 256 to get the position in samples from the beginning of the sample where playback should start. If no sample is specified, the sample currently playing is retriggered to the offset specified. **09 - Set sample offset.** This functionality enables you to start a sample from a specified position rather than the normal beginning position. Multiply value XXYY * 256 to get the position in samples from the beginning of the sample where playback should start. If no sample is specified, the sample currently playing is retriggered to the offset specified.
Line 393: Line 393:
  
 **07 - Set sample offset (by percentage).** XXYY from 0000 (sample start) to 8000 (sample end). **07 - Set sample offset (by percentage).** XXYY from 0000 (sample start) to 8000 (sample end).
-Video: [[http://​www.youtube.com/​watch?​v=j2aCYlYufH8|Sampler Retriggering / Scaling]]+Video: [[https://​www.youtube.com/​watch?​v=j2aCYlYufH8|Sampler Retriggering / Scaling]]
  
 **0A - Slide velocity up/down.** This effect will change the velocity of the synth being played on a track. The value XXYY the speed of the velocity change. If XX is nonzero the velocity is increased, and if YY is nonzero the velocity is decreased. **0A - Slide velocity up/down.** This effect will change the velocity of the synth being played on a track. The value XXYY the speed of the velocity change. If XX is nonzero the velocity is increased, and if YY is nonzero the velocity is decreased.
Line 443: Line 443:
 **40...5F - delay an event for selected fraction of the line** (from 0% (40) to 96.875% (5F)). **40...5F - delay an event for selected fraction of the line** (from 0% (40) to 96.875% (5F)).
  
-Video: [[http://​www.youtube.com/​watch?​v=u16mkFvORDs|Standard Effects]]+Video: [[https://​www.youtube.com/​watch?​v=u16mkFvORDs|Standard Effects]]
    
 ==== MIDI Out ==== ==== MIDI Out ====
Line 516: Line 516:
 ==== Interpolator ==== ==== Interpolator ====
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​interpolator.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​interpolator.png"></​html>​
  
 Interpolator is a tool that provides the ability to make a smooth transition between the values of the selected area of the pattern, with various parameters (like the curve type, noise, etc.). Interpolator is a tool that provides the ability to make a smooth transition between the values of the selected area of the pattern, with various parameters (like the curve type, noise, etc.).
Line 526: Line 526:
   * Fourth row: envelope begin/end values (are only relevant for the **Apply envelope** button).   * Fourth row: envelope begin/end values (are only relevant for the **Apply envelope** button).
   * Fifth row:   * Fifth row:
-    * **Interpolate**:​ New value = Smooth transition between the first and the last line of the selection. Video: [[http://​www.youtube.com/​watch?​v=YvoBa0IsDgI|Interpolation]] +    * **Interpolate**:​ New value = Smooth transition between the first and the last line of the selection. Video: [[https://​www.youtube.com/​watch?​v=YvoBa0IsDgI|Interpolation]] 
-    * **Apply envelope**: New value = Old value * Smooth transition between the **Env.Start** and the **Env.end** parameters. Video: [[http://​www.youtube.com/​watch?​v=7IFEFjDlqR8|How to Apply the Envelope]]+    * **Apply envelope**: New value = Old value * Smooth transition between the **Env.Start** and the **Env.end** parameters. Video: [[https://​www.youtube.com/​watch?​v=7IFEFjDlqR8|How to Apply the Envelope]]
 If you want the smooth transition between the first and the last line of your selection - use **Interpolate**. If you want the smooth transition between the first and the last line of your selection - use **Interpolate**.
 But if you want to change the existing values (fade them out for example) - use **Apply envelope**. But if you want to change the existing values (fade them out for example) - use **Apply envelope**.
 ===== Module ===== ===== Module =====
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​module.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​module.png"></​html>​
  
 **Module** is a basic element of the SunVox. There are several types of modules: **Module** is a basic element of the SunVox. There are several types of modules:
Line 544: Line 544:
  
 There are three ways to connect one module to another: There are three ways to connect one module to another:
-  * Select the first module (source). Click on the <​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​btn_link.png"></​html>​ button. Select the second module (destination).+  * Select the first module (source). Click on the <​html><​img src="https://​warmplace.ru/​docs/​sunvox/​btn_link.png"></​html>​ button. Select the second module (destination).
   * Select the first module (source). Drag it to destination with SHIFT key pressed.   * Select the first module (source). Drag it to destination with SHIFT key pressed.
-  * For multitouch devices: first touch on source, second touch on destination. See [[http://​www.youtube.com/​watch?​v=IH6LiIERfHY|this simple video-tutorial]].+  * For multitouch devices: first touch on source, second touch on destination. See [[https://​www.youtube.com/​watch?​v=IH6LiIERfHY|this simple video-tutorial]].
 Reconnection removes the previous connection. Reconnection removes the previous connection.
  
Line 553: Line 553:
 Every module has a set of parameters (**controllers**):​ Every module has a set of parameters (**controllers**):​
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​ctls.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​ctls.png"></​html>​
  
 Click twice (or right click) on the controller to open the **Controller Properties** window, where you can do the following operations: change, reset, randomize, write to pattern, assign MIDI IN: Click twice (or right click) on the controller to open the **Controller Properties** window, where you can do the following operations: change, reset, randomize, write to pattern, assign MIDI IN:
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​ctl_props.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​ctl_props.png"></​html>​
  
 === Controller automation === === Controller automation ===
Line 568: Line 568:
  
 If automation is recorded in a pattern, then the changes do not occur smoothly, but in steps. Step length = 1 tick (after live recording), or 1 line (in other cases). To make changes smoother, automation commands can be sent to the MultiCtl module (in which the Response parameter is different from 1000), which will smooth the changes and send commands to other modules connected to it. If automation is recorded in a pattern, then the changes do not occur smoothly, but in steps. Step length = 1 tick (after live recording), or 1 line (in other cases). To make changes smoother, automation commands can be sent to the MultiCtl module (in which the Response parameter is different from 1000), which will smooth the changes and send commands to other modules connected to it.
 +
 +Video: [[https://​www.youtube.com/​watch?​v=OP17yOT5HPI|Automation in SunVox: six ways]]
 ==== Modes ==== ==== Modes ====
  
Line 589: Line 591:
 ===== Timeline ===== ===== Timeline =====
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​timeline.png"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​timeline.png"></​html>​
  
 **Timeline** defines the layout of the SunVox project. It describes how to play the patterns. Patterns can be repeated across multiple orders to save tracking time and file space. **Timeline** defines the layout of the SunVox project. It describes how to play the patterns. Patterns can be repeated across multiple orders to save tracking time and file space.
Line 607: Line 609:
 The sound quality of this module is better at a sample rate of 44100Hz. The sound quality of this module is better at a sample rate of 44100Hz.
  
-Video: [[http://​www.youtube.com/​watch?​v=on67bFRtktw|Virtual Analog Generator]]+Video: [[https://​www.youtube.com/​watch?​v=on67bFRtktw|Virtual Analog Generator]]
  
 ==== DrumSynth ==== ==== DrumSynth ====
Line 634: Line 636:
  
 Videos: Videos:
-  * [[http://​www.youtube.com/​watch?​v=EBdJPFISe0g|DrumSynth]] +  * [[https://​www.youtube.com/​watch?​v=EBdJPFISe0g|DrumSynth]] 
-  * [[http://​www.youtube.com/​watch?​v=VNwcJGdfRLM|DrumSynth and Patterns]]+  * [[https://​www.youtube.com/​watch?​v=VNwcJGdfRLM|DrumSynth and Patterns]]
  
 ==== FM ==== ==== FM ====
Line 641: Line 643:
 [[https://​en.wikipedia.org/​wiki/​Frequency_modulation_synthesis|FM-based]] synth. Abbreviations:​ C - carrier; M - modulator. [[https://​en.wikipedia.org/​wiki/​Frequency_modulation_synthesis|FM-based]] synth. Abbreviations:​ C - carrier; M - modulator.
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​fm.gif"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​fm.gif"></​html>​
  
 The sound quality of this module is better at a sample rate of 44100Hz. The sound quality of this module is better at a sample rate of 44100Hz.
Line 669: Line 671:
  
 Videos: Videos:
-  * [[http://​www.youtube.com/​watch?​v=IH6LiIERfHY|FM Synth]] +  * [[https://​www.youtube.com/​watch?​v=IH6LiIERfHY|FM Synth]] 
-  * [[http://​www.youtube.com/​watch?​v=sx7aFSLbOD0|FM synth. Another example]]+  * [[https://​www.youtube.com/​watch?​v=sx7aFSLbOD0|FM synth. Another example]]
  
 ==== Generator ==== ==== Generator ====
Line 702: Line 704:
  
 Videos: Videos:
-  * [[http://​www.youtube.com/​watch?​v=YbWa_wV639g|Generator Module]] +  * [[https://​www.youtube.com/​watch?​v=YbWa_wV639g|Generator Module]] 
-  * [[http://​www.youtube.com/​watch?​v=RbuLOMvCDGc|Drawing your own waveform in Generator]] +  * [[https://​www.youtube.com/​watch?​v=RbuLOMvCDGc|Drawing your own waveform in Generator]] 
-  * [[http://​www.youtube.com/​watch?​v=C_SCQdZBGKg|Drawing your own waveform in Generator #2]]+  * [[https://​www.youtube.com/​watch?​v=C_SCQdZBGKg|Drawing your own waveform in Generator #2]]
  
 ==== Input ==== ==== Input ====
Line 727: Line 729:
   * Anticlick: 0 - OFF; 1 - ON.   * Anticlick: 0 - OFF; 1 - ON.
  
-Video: [[http://​www.youtube.com/​watch?​v=r4NN-w9TwQ4|Kicker,​ Compressor, and Ducking]]+Video: [[https://​www.youtube.com/​watch?​v=r4NN-w9TwQ4|Kicker,​ Compressor, and Ducking]]
  
 ==== Vorbis player ==== ==== Vorbis player ====
Line 754: Line 756:
  
 Videos: Videos:
-  * [[http://​www.youtube.com/​watch?​v=IQ7asEBSvig|Sampler Modules]] +  * [[https://​www.youtube.com/​watch?​v=IQ7asEBSvig|Sampler Modules]] 
-  * [[http://​www.youtube.com/​watch?​v=YTlNQ5rDquA|How to make the voice with loop in Sampler]] +  * [[https://​www.youtube.com/​watch?​v=YTlNQ5rDquA|How to make the voice with loop in Sampler]] 
-  * [[http://​www.youtube.com/​watch?​v=ColyxxBzeiE|Sampler eats JPEG images ]] +  * [[https://​www.youtube.com/​watch?​v=ColyxxBzeiE|Sampler eats JPEG images ]] 
-  * [[http://​www.youtube.com/​watch?​v=j2aCYlYufH8|Sampler Retriggering / Scaling]] +  * [[https://​www.youtube.com/​watch?​v=j2aCYlYufH8|Sampler Retriggering / Scaling]] 
-  * [[http://​www.youtube.com/​watch?​v=i2o2yBNoqB8|Input Module and Sampler Recording]]+  * [[https://​www.youtube.com/​watch?​v=i2o2yBNoqB8|Input Module and Sampler Recording]]
   * [[https://​www.youtube.com/​watch?​v=BNfxakj_ghE|Sampler Envelopes]]   * [[https://​www.youtube.com/​watch?​v=BNfxakj_ghE|Sampler Envelopes]]
  
Line 794: Line 796:
     * 6 - full sine.     * 6 - full sine.
  
-Video: [[http://​www.youtube.com/​watch?​v=woDptZv1nSg|SpectraVoice:​ four harmonics]]+Video: [[https://​www.youtube.com/​watch?​v=woDptZv1nSg|SpectraVoice:​ four harmonics]]
  
 ===== Effects ===== ===== Effects =====
Line 809: Line 811:
   * Volume;   * Volume;
   * Stereo balance;   * Stereo balance;
-  * [[http://​en.wikipedia.org/​wiki/​DC_offset|DC offset]];+  * [[https://​en.wikipedia.org/​wiki/​DC_offset|DC offset]];
   * Inverse amplitude: 0 - off; 1 - on;   * Inverse amplitude: 0 - off; 1 - on;
   * Width - stereo width: 0 - mono; 128 - normal; 256 - extended;   * Width - stereo width: 0 - mono; 128 - normal; 256 - extended;
Line 818: Line 820:
 ==== Compressor ==== ==== Compressor ====
  
-[[http://​en.wikipedia.org/​wiki/​Dynamic_range_compression|Side chain compressor]]+[[https://​en.wikipedia.org/​wiki/​Dynamic_range_compression|Side chain compressor]]
  
 Controllers:​ Controllers:​
Line 830: Line 832:
  
 Videos: Videos:
-  * [[http://​www.youtube.com/​watch?​v=fjR2rVmZh58|Side Chain Compressor]] +  * [[https://​www.youtube.com/​watch?​v=fjR2rVmZh58|Side Chain Compressor]] 
-  * [[http://​www.youtube.com/​watch?​v=r4NN-w9TwQ4|Kicker,​ Compressor, and Ducking]]+  * [[https://​www.youtube.com/​watch?​v=r4NN-w9TwQ4|Kicker,​ Compressor, and Ducking]]
  
-[[http://www.warmplace.ru/​forum/​viewtopic.php?​f=16&​t=1223#​p9756|Explanation of compressor settings on the forum]]+[[https://​warmplace.ru/​forum/​viewtopic.php?​f=16&​t=1223#​p9756|Explanation of compressor settings on the forum]]
 ==== DC Blocker ==== ==== DC Blocker ====
  
-[[http://​en.wikipedia.org/​wiki/​DC_offset|DC]] blocking filter.+[[https://​en.wikipedia.org/​wiki/​DC_offset|DC]] blocking filter.
  
 Controllers:​ Controllers:​
Line 861: Line 863:
 Controllers:​ Controllers:​
   * Volume;   * Volume;
-  * Distortion type: <​html><​br><​img src="http://www.warmplace.ru/​docs/​sunvox/​disttypes.gif"></​html>​+  * Distortion type: <​html><​br><​img src="https://​warmplace.ru/​docs/​sunvox/​disttypes.gif"></​html>​
   * Power - amount of distortion of the type selected above;   * Power - amount of distortion of the type selected above;
   * Bit depth - change it to reduce the resolution of the incoming sound; default value 16 means that the bit depth remains unchanged;   * Bit depth - change it to reduce the resolution of the incoming sound; default value 16 means that the bit depth remains unchanged;
Line 924: Line 926:
  
 Videos: Videos:
-  * [[http://​www.youtube.com/​watch?​v=4tZDfUia-YE|Acid Bass]] +  * [[https://​www.youtube.com/​watch?​v=4tZDfUia-YE|Acid Bass]] 
-  * [[http://​www.youtube.com/​watch?​v=eB1nLZTpmrA|Filter LFO + MultiSynth]] +  * [[https://​www.youtube.com/​watch?​v=eB1nLZTpmrA|Filter LFO + MultiSynth]] 
-  * [[http://​www.youtube.com/​watch?​v=YdcYki5emHU|Changing Filter frequency from the pattern]]+  * [[https://​www.youtube.com/​watch?​v=YdcYki5emHU|Changing Filter frequency from the pattern]]
  
 ==== Filter Pro ==== ==== Filter Pro ====
Line 981: Line 983:
  
 Here are three ways to use this module. Here are three ways to use this module.
-  - Generator=OFF;​ some signal is sent to the input; at the output we get the same signal, but its volume changes in accordance with the oscillations of the built-in oscillator. <​html><​br><​img src="http://www.warmplace.ru/​docs/​sunvox/​lfo1.png"></​html>​ +  - Generator=OFF;​ some signal is sent to the input; at the output we get the same signal, but its volume changes in accordance with the oscillations of the built-in oscillator. <​html><​br><​img src="https://​warmplace.ru/​docs/​sunvox/​lfo1.png"></​html>​ 
-  - Generator=ON;​ the input is empty; at the output we get the wave of the built-in oscillator; this output signal can be used for something else, for example to modulate the volume or frequency through the [[manual_en#​modulator|Modulator]]. <​html><​br><​img src="http://www.warmplace.ru/​docs/​sunvox/​lfo2.png"></​html>​ +  - Generator=ON;​ the input is empty; at the output we get the wave of the built-in oscillator; this output signal can be used for something else, for example to modulate the volume or frequency through the [[manual_en#​modulator|Modulator]]. <​html><​br><​img src="https://​warmplace.ru/​docs/​sunvox/​lfo2.png"></​html>​ 
-  - Generator=ON;​ the input is empty; output is connected to [[manual_en#​sound2ctl|Sound2Ctl]];​ thus, the LFO can change the values of the controllers of other modules. <​html><​br><​img src="http://www.warmplace.ru/​docs/​sunvox/​lfo3.png"></​html>​+  - Generator=ON;​ the input is empty; output is connected to [[manual_en#​sound2ctl|Sound2Ctl]];​ thus, the LFO can change the values of the controllers of other modules. <​html><​br><​img src="https://​warmplace.ru/​docs/​sunvox/​lfo3.png"></​html>​
  
 Controllers:​ Controllers:​
Line 990: Line 992:
   * Amplitude;   * Amplitude;
   * Frequency;   * Frequency;
-  * Waveform: <​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​lfo_waveforms.png"></​html>​+  * Waveform: <​html><​img src="https://​warmplace.ru/​docs/​sunvox/​lfo_waveforms.png"></​html>​
   * Set phase - initial phase (after the module reset or after receiving the note (Note ON)) or the command to immediately set the phase to a new value;   * Set phase - initial phase (after the module reset or after receiving the note (Note ON)) or the command to immediately set the phase to a new value;
   * Channels: 0 - stereo; 1 - mono;   * Channels: 0 - stereo; 1 - mono;
Line 1007: Line 1009:
   * Mode: 0 - normal; 1 - ping-pong loop playback.   * Mode: 0 - normal; 1 - ping-pong loop playback.
  
-Video: [[http://​www.youtube.com/​watch?​v=ZBA0JYm7epQ|Loop Module]]+Video: [[https://​www.youtube.com/​watch?​v=ZBA0JYm7epQ|Loop Module]]
  
 ==== Modulator ==== ==== Modulator ====
Line 1013: Line 1015:
 Amplitude or Phase modulator. First input = Carrier. Other inputs = Modulators. Amplitude or Phase modulator. First input = Carrier. Other inputs = Modulators.
  
-More info about amplitude modulation: ​http://​en.wikipedia.org/​wiki/​Amplitude_modulation+More info about amplitude modulation: ​https://​en.wikipedia.org/​wiki/​Amplitude_modulation
  
 More info about phase modulation: https://​en.wikipedia.org/​wiki/​Phase_modulation More info about phase modulation: https://​en.wikipedia.org/​wiki/​Phase_modulation
  
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​am.gif"></​html>​ +<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​am.gif"></​html>​ 
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​fm.gif"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​fm.gif"></​html>​
 ==== Pitch Shifter ==== ==== Pitch Shifter ====
  
-Video: [[http://​www.youtube.com/​watch?​v=vgOMdA6m3Ys|Pitch Shifter]]+Video: [[https://​www.youtube.com/​watch?​v=vgOMdA6m3Ys|Pitch Shifter]]
  
 ==== Reverb ==== ==== Reverb ====
Line 1056: Line 1058:
   * Mono: 0 - Stereo; 1 - Mono.   * Mono: 0 - Stereo; 1 - Mono.
  
-Video: [[http://​www.youtube.com/​watch?​v=f6ElIPjwXW8|How to make a beautiful synthetic choir]]+Video: [[https://​www.youtube.com/​watch?​v=f6ElIPjwXW8|How to make a beautiful synthetic choir]]
  
 ==== Vibrato ==== ==== Vibrato ====
Line 1096: Line 1098:
 Internal Feedback delay = 20 ms. Internal Feedback delay = 20 ms.
  
-<​html><​img src="http://www.warmplace.ru/​images/​sunvox_feedback.png"></​html>​+<​html><​img src="https://​warmplace.ru/​images/​sunvox_feedback.png"></​html>​
  
 ==== Glide ==== ==== Glide ====
Line 1121: Line 1123:
 Example in simple_examples folder: raspberry_pi_gpio. Example in simple_examples folder: raspberry_pi_gpio.
  
-Video: [[http://​www.youtube.com/​watch?​v=JBrBPuhQfbI|Using Raspberry Pi GPIO in SunVox]]+Video: [[https://​www.youtube.com/​watch?​v=JBrBPuhQfbI|Using Raspberry Pi GPIO in SunVox]]
  
 ==== MetaModule ==== ==== MetaModule ====
Line 1142: Line 1144:
   * Sample rate; optimal value = 150Hz, please avoid higher values without the urgent need.   * Sample rate; optimal value = 150Hz, please avoid higher values without the urgent need.
  
-Video: [[http://​www.youtube.com/​watch?​v=xloGNkTLbFU|MultiCtl Module]]+Video: [[https://​www.youtube.com/​watch?​v=xloGNkTLbFU|MultiCtl Module]]
  
 ==== MultiSynth ==== ==== MultiSynth ====
Line 1166: Line 1168:
  
 Videos: Videos:
-  * [[http://​www.youtube.com/​watch?​v=0FEOZevIYKs|MultiSynth]] +  * [[https://​www.youtube.com/​watch?​v=0FEOZevIYKs|MultiSynth]] 
-  * [[http://​www.youtube.com/​watch?​v=lo9W2HzJm_s|MultiSynth #2]]+  * [[https://​www.youtube.com/​watch?​v=lo9W2HzJm_s|MultiSynth #2]]
  
 ==== Pitch2Ctl ==== ==== Pitch2Ctl ====
Line 1196: Line 1198:
 If you want to disable this module: just mute it, or set OUT Controller to 0. If you want to disable this module: just mute it, or set OUT Controller to 0.
  
-Video: [[http://​www.youtube.com/​watch?​v=Qz9Tmf_MTgE|Sound2Ctl Module]]+Video: [[https://​www.youtube.com/​watch?​v=Qz9Tmf_MTgE|Sound2Ctl Module]]
  
 ==== Velocity2Ctl ==== ==== Velocity2Ctl ====
Line 1220: Line 1222:
  
 In most cases, you should not change this file manually, because the main settings are available in the SunVox Preferences window. In most cases, you should not change this file manually, because the main settings are available in the SunVox Preferences window.
-But if you want to use some specific options, you can create your own configuration file  [[http://www.warmplace.ru/​soft/​sunvox/​sunvox_config.ini|based on this one (description of all options)]].+But if you want to use some specific options, you can create your own configuration file  [[https://​warmplace.ru/​soft/​sunvox/​sunvox_config.ini|based on this one (description of all options)]].
  
 ====== Links ====== ====== Links ======
  
-  * [[http://www.warmplace.ru/​forum/​viewforum.php?​f=16|Forum]] +  * [[https://​warmplace.ru/​forum/​viewforum.php?​f=16|Forum]] 
-  * [[http://www.warmplace.ru/​forum/​viewtopic.php?​f=3&​t=1223|Video tutorials]] +  * [[https://​warmplace.ru/​forum/​viewtopic.php?​f=3&​t=1223|Video tutorials]] 
-  * [[http://www.warmplace.ru/​forum/​viewforum.php?​f=11|Modules]]+  * [[https://​warmplace.ru/​forum/​viewforum.php?​f=11|Modules]]
   * [[https://​soundcloud.com/​sunvox|SunVox music on SoundCloud]]   * [[https://​soundcloud.com/​sunvox|SunVox music on SoundCloud]]
  
Line 1282: Line 1284:
 **__How to open the sample editor?__** **__How to open the sample editor?__**
  
-Please check this [[http://​www.youtube.com/​watch?​v=YTlNQ5rDquA|video-tutorial]].+Please check this [[https://​www.youtube.com/​watch?​v=YTlNQ5rDquA|video-tutorial]].
  
 **__For multisamples,​ how do I set the root note of my sample?__** **__For multisamples,​ how do I set the root note of my sample?__**
Line 1293: Line 1295:
  
 Step 1. Open new empty sampler:\\ Step 1. Open new empty sampler:\\
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​sunvox_sampler_01.jpg"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​sunvox_sampler_01.jpg"></​html>​
  
 Step 2. Load sample 0:\\ Step 2. Load sample 0:\\
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​sunvox_sampler_02.jpg"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​sunvox_sampler_02.jpg"></​html>​
  
 Step 3. Sample 0 loaded:\\ Step 3. Sample 0 loaded:\\
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​sunvox_sampler_03.jpg"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​sunvox_sampler_03.jpg"></​html>​
  
 Step 4. Load sample 1:\\ Step 4. Load sample 1:\\
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​sunvox_sampler_04.jpg"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​sunvox_sampler_04.jpg"></​html>​
  
 Step 5. Sample 1 loaded:\\ Step 5. Sample 1 loaded:\\
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​sunvox_sampler_05.jpg"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​sunvox_sampler_05.jpg"></​html>​
  
 Step 6. Make sample 1 playable on octaves 5 and 6:\\ Step 6. Make sample 1 playable on octaves 5 and 6:\\
-<​html><​img src="http://www.warmplace.ru/​docs/​sunvox/​sunvox_sampler_06.jpg"></​html>​+<​html><​img src="https://​warmplace.ru/​docs/​sunvox/​sunvox_sampler_06.jpg"></​html>​
  
 ===== Sound ===== ===== Sound =====
Line 1361: Line 1363:
 Open the Android Settings -> Apps -> SunVox -> enable the "​record audio" permission. Open the Android Settings -> Apps -> SunVox -> enable the "​record audio" permission.
  
-[[http://​warmplace.ru/​android|Known solutions for other problems]]+[[https://​warmplace.ru/​android|Known solutions for other problems]]
  
 ===== macOS ===== ===== macOS =====
Line 1367: Line 1369:
 **__Copy/​Paste don't work, the previous session is not saved __** **__Copy/​Paste don't work, the previous session is not saved __**
  
-[[http://www.warmplace.ru/​forum/​viewtopic.php?​f=3&​t=4399|Please read this instruction]]+[[https://​warmplace.ru/​forum/​viewtopic.php?​f=3&​t=4399|Please read this instruction]]
sunvox/manual_en.txt · Last modified: 2019/10/14 07:58 by nightradio