Page 1 of 1

Declicking my patch

Posted: Fri Mar 06, 2020 5:42 pm
by a1matt
Can anyone help me remove the clicks on the attack of my synth patch?

Mediafire: ... unvox/file

Some background...
It's a simple patch - based on two detuned samples.

If I set 'random phase' to 0 on the 'multi ctl' it gets rid of the clicks, but I also lose the character of the sound.

The random phase also stops the samplers built in volume envelopes from being a solution.

I've spent a couple of hours messing with sound2ctl, and don't know if I am just not adept enough with it, or whether a different approach is needed. (I can explain what I have tried if it helps).

Any input appreciated.

Re: Declicking my patch

Posted: Fri Mar 06, 2020 6:00 pm
by Trackerbound
Select the Sampler module, press "Edit" and switch to "Envelopes" tab. Select the Volume envelope.

Set three points for the envelope:
0: line 0, tick 0, Y: 0
1: line 0, tick 1, Y: 1, set it as a sustain point
2: line 0, tick 2, Y: 0

Enable sustain in the menu and enable the envelope. Do this to each sample that has clicks.

Re: Declicking my patch

Posted: Fri Mar 06, 2020 6:52 pm
by a1matt
Thank you for such a speedy and detailed reply.

I'll give that a go and report back.

Edit - I tried it and it works perfectly. I also now understand the sampler envelopes more. This will open up more options for future sound design.

Edit edit - the finished patch is available in the modules section of the forum: ... =11&t=5238

Thanks again @trackerbound :beer: