SunVox 2.0 BETA

Multi-platform modular music creation studio
catherder
Posts: 10
Joined: Wed Nov 06, 2019 1:08 am

Re: SunVox 2.0 BETA

Post by catherder »

Thanks a lot for all the work and dedication you put into SunVox.
Have a Merry Christmas and a Happy New Year.
(donation is on it's way).
iaon
Posts: 236
Joined: Mon Jun 02, 2014 7:56 am

Re: SunVox 2.0 BETA

Post by iaon »

FFT module: Are the labels switched on the last two controllers?

"0F.LP cutoff" starts at zero and does a low cut = high pass (HP)
"10.HP cutoff" starts at max and does a high cut = low pass (LP)
User avatar
NightRadio
Site Admin
Posts: 3941
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: SunVox 2.0 BETA

Post by NightRadio »

iaon wrote: Fri Dec 24, 2021 1:09 am "0F.LP cutoff" starts at zero and does a low cut = high pass (HP)
"10.HP cutoff" starts at max and does a high cut = low pass (LP)
Yes, that's a typo :) Will be fixed
User avatar
NightRadio
Site Admin
Posts: 3941
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: FMX's dynamic feedback (moved to forum from DM)

Post by NightRadio »

FM6 wrote: Wed Dec 22, 2021 11:24 pm If you look at this video below, you will notice the difference between the Mega Drive's YM2612 and FMX's feedback.
Thank you for the video!
The difference seems to be that the operator volume is applied before the feedback in YM2612.
But in FMX feedback is before the volume control.
I will try to make some additional mode
User avatar
FM6
Posts: 8
Joined: Sun Dec 05, 2021 8:56 pm

Re: FMX's dynamic feedback (moved to forum from DM)

Post by FM6 »

NightRadio wrote: Fri Dec 24, 2021 11:24 am
FM6 wrote: Wed Dec 22, 2021 11:24 pm If you look at this video below, you will notice the difference between the Mega Drive's YM2612 and FMX's feedback.
Thank you for the video!
The difference seems to be that the operator volume is applied before the feedback in YM2612.
But in FMX feedback is before the volume control.
I will try to make some additional mode
Thank you so much for your concern! Keep going! You make our dreams come true! :Yahoo!:
Last edited by FM6 on Thu Dec 30, 2021 2:09 pm, edited 1 time in total.
User avatar
NightRadio
Site Admin
Posts: 3941
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: SunVox 2.0 BETA

Post by NightRadio »

BETA2 is out:
https://warmplace.ru/soft/sunvox/sunvox-2.0-beta2.zip
  • module and timeline editor: "Select All" has been changed to "Select/Unselect All";
  • FFT: "Volume" ctl;
  • Delay: new "Delay units" values: sec/44100, sec/48000;
  • bug fixes;
User avatar
sk0
Posts: 63
Joined: Fri Oct 18, 2019 10:45 am
Location: Tokyo

Re: SunVox 2.0 BETA

Post by sk0 »

Thank you very much for the great work! :)
Is it possible to make SunVox turn on or off the multiple module selection mode at startup by recording in the sunvox_config.ini whether it was turned on or off at the last exit? It seems to be on by default at startup, but I like to leave it off most of the time because I want to scroll by left-clicking and dragging, so it would be nice to be able to do that.
Koekepan
Posts: 262
Joined: Thu Dec 05, 2013 4:56 am

Re: SunVox 2.0 BETA

Post by Koekepan »

Thank you very much for all the updates, but the round robin in particular. That mode has so many useful applications.
User avatar
Keres
Posts: 466
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: SunVox 2.0 BETA

Post by Keres »

what in the heck is Amplifier: new controller "Bipolar DC Offset" ???

another DC offset? couldn't u just use 2 amps?
User avatar
Keres
Posts: 466
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: SunVox 2.0 BETA

Post by Keres »

also, i think you have the LP and the HP labeled wrong in the Delay module.
User avatar
Keres
Posts: 466
Joined: Mon Mar 21, 2016 9:41 am
Location: N. Tulsa Ok.
Contact:

Re: SunVox 2.0 BETA

Post by Keres »

oh yeah, merry Christmas and thanks for the new Sunvox!
User avatar
AutumnCheney
Posts: 503
Joined: Sun Dec 29, 2019 8:16 am
Location: tahlequah, ok, usa
Contact:

Re: SunVox 2.0 BETA

Post by AutumnCheney »

so i was playing with the fmx, and i noticed something that should be changed

when the "input -> custom waveform" controller is set to "continuous", and you send some audio and a note into the module, the output audio is really distorted and crusty. this without any modulation applied to the operator

i also noticed that the audio pitch changes when the note pitch changes, so i guess it's pitch shifting the audio, but i was wondering if there was a way to disable this or work around it
my website: https://acheney.xyz

it features my music, sunvox content, and social media links!
CoryCulley
Posts: 30
Joined: Wed Aug 03, 2016 1:09 am

Re: SunVox 2.0 BETA

Post by CoryCulley »

Oh this is exciting. The long anticipated proper FM synth module is finally coming to Sunvox.

I must say, writing code for fixed point phase modulation is a real pain to figure out but it looks like Nightradio went all out on this one! This is going to be awesome.
User avatar
NightRadio
Site Admin
Posts: 3941
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: SunVox 2.0 BETA

Post by NightRadio »

what in the heck is Amplifier: new controller "Bipolar DC Offset" ???
Later I will try to describe this parameter in more detail :)
Now just try it with some basic waveform, like sine

also, i think you have the LP and the HP labeled wrong in the Delay module.
Do you mean FMX? :)
Already fixed in BETA2

when the "input -> custom waveform" controller is set to "continuous", and you send some audio and a note into the module, the output audio is really distorted and crusty. this without any modulation applied to the operator
This is ok :) You continuously write some data to the waveform and at the same time try to play this waveform at different speeds.
You probably need 06.Input->Operator# controller instead of 07
User avatar
NightRadio
Site Admin
Posts: 3941
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: SunVox 2.0 BETA

Post by NightRadio »

Thank you all for your support! And Merry Christmas!
Post Reply