Filter pro module [FIXED 25.07.15]

Found a bug? Post it here.
Post Reply
ESA-kp
Posts: 14
Joined: Mon Jul 21, 2014 11:20 am

Filter pro module [FIXED 25.07.15]

Post by ESA-kp » Tue Jul 21, 2015 8:13 pm

Sunvox 1.9 on Android 4.3

Great module added but in the new types of filters (allpass, peaking, high and low shelf) when I set the roll-off highter than 12db, I've a very distorted wave (not due to an amplitude saturation).

Thanks

User avatar
NightRadio
Site Admin
Posts: 3351
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: Filter pro module

Post by NightRadio » Wed Jul 22, 2015 4:52 pm

Please send your project file (with distortion) to me

ESA-kp
Posts: 14
Joined: Mon Jul 21, 2014 11:20 am

Re: Filter pro module

Post by ESA-kp » Thu Jul 23, 2015 4:42 am

I've simplified my project to be more clean.
In this project I can hear only the first of four sinusoid signals that correspond to 12dB of slope.
filter-rolloff-test.sunvox
Test project
(2.16 KiB) Downloaded 287 times

User avatar
NightRadio
Site Admin
Posts: 3351
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: Filter pro module

Post by NightRadio » Thu Jul 23, 2015 12:48 pm

ok, thank you.
In the current version the rolloff is not supported by the following filter types: all pass, peaking, low shelf, high shelf.
Of course the sound must be unchanged on rolloff>12. Without any noise. This bug fill be fixed in the next minor update.

Post Reply