Could have these controllers:
1) value - 0x0000 to 0x8000
2) MIDI controller - 0x00 to 0x80
3) resolution - 7-bit or 14-bit (default 7-bit; 14-bit available for controllers 0-0x1f)
You would set the MIDI device and channel as you would for a MultiSynth.
Whenever value is set, it is converted to 7 or 14-bit range, then corresponding MIDI CC message(s) are sent immediately
Example use case: LFO on the mod wheel of an external synth: amp > lfo > sound2ctl > ctl2midictl value (out MIDI controller is set to 1)
Ctl2MidiCtl module
Re: Ctl2MidiCtl module
As per a recent discussion on Facebook, this type of module could also be useful if it could do PC and not just CC messages.
https://www.facebook.com/groups/sunvox/ ... 973734902/
https://www.facebook.com/groups/sunvox/ ... 973734902/