Help using Pixivisor with iRig Mix

Post Reply
sarah_hankins
Posts: 9
Joined: Tue Nov 18, 2014 6:57 am

Help using Pixivisor with iRig Mix

Post by sarah_hankins » Tue Nov 18, 2014 7:23 am

Hi all,

I'm having real trouble getting PixiVisor transmitter on my MacBook Pro to talk to the receiver on my iPad Air through iRig Mix. Could anybody detail the exact signal path, hardware setup, and settings on the devices that are required in order for this to work?? I swear I have read everything I can find and watched all of the videos. But I still can't figure it out.

Thank you,
Sarah

User avatar
NightRadio
Site Admin
Posts: 3016
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: Help using Pixivisor with iRig Mix

Post by NightRadio » Tue Nov 18, 2014 9:07 am

Hello Sarah!

1) Please make sure that you receive the signal from Mac. Just check it in any iOS audio recorder. Garage Band, for example.
2) If you have the stereo input, make sure that you have your signal at least on the Left channel.

sarah_hankins
Posts: 9
Joined: Tue Nov 18, 2014 6:57 am

Re: Help using Pixivisor with iRig Mix

Post by sarah_hankins » Wed Nov 19, 2014 8:36 am

Thank you :) Another part of the question is: how should I physically connect my iPad to the iRig Mix? Should the iPad go INTO Channel 2 on the iRig using the 3.5 mm TRRS cable, or should the iPad be the OUTPUT of the iRig using an RCA-3.5mm TRRS cable?

Apologies if these are simple questions -- I am still having trouble.

Thanks,
Sarah

User avatar
NightRadio
Site Admin
Posts: 3016
Joined: Fri Jan 23, 2004 12:28 am
Location: Ekaterinburg. Russia
Contact:

Re: Help using Pixivisor with iRig Mix

Post by NightRadio » Wed Nov 19, 2014 1:03 pm

Sorry, i actually don't know anything about iRig Mix. Please check some examples of the Mic/Guitar connection to this device

Post Reply